close
close

How To Install Blink Outdoor Camera On Vinyl Siding

How To Install Blink Outdoor Camera On Vinyl Siding. The following easy steps explain how to install and configure your blink solar panel mount. Advantages of attaching a blink xt to a gutter or soffit.

12Pack Vinyl Siding Hooks for Security Camera Blink XT2/XT from www.ebay.com

For additional help with mounting or setup, vis. Attach the camera’s power cable to the power adapter, then insert the adapter into a nearby power outlet. Just roll the hook into any seam in vinyl or aluminum siding, allowing the flexible positioning of your blink outdoor blink xt2 camera.

Insert Each Screw Through The Hole And Tight Them Safely With The Drill.

You just tuck the curved section under the vinyl siding until you hear/feel a click and then install the camera mount. Once you are ready to mount the security cameras on vinyl siding, match up the holes of the vinyl siding to the ones in the material of your home and screw in the mounting and the camera. Hold the camera up to the vinyl siding so that the screw holes are in line with those in the wall.

Link The Surveillance Camera’s Coaxial Wires From The Cameras’ Output To The Dvr Input Using Bnc Connectors (Male And Female).

Anyway, here are seven easy ways you can install blink cameras without screws or drilling the surface. Murph september 2, 2017, 6:19pm #1. Drill until the piece of tape is flush with the surface of the siding.

Just Roll The Hook Into Any Seam In Vinyl Or Aluminum Siding, Allowing The Flexible Positioning Of Your Blink Outdoor Blink Xt2 Camera.

For additional help with mounting or setup, vis. Then, mark the holes for the screws of the mounting bracket and any wiring using a pencil. Remember to connect your cables through the inside of your home fist to ensure it is all connected safely before you finish installing the security cameras on vinyl siding.

No Holes Or Tools Required:

Attach the camera’s power cable to the power adapter, then insert the adapter into a nearby power outlet. The gutter and soffit are great locations for a blink xt outdoor camera because these are the highest locations on most homes and offices. Make sure this fits by entering your model number.

The Installation Couldn't Have Been Easier!

Provide 90 degree tilt and 360 rotation and adjust the camera whatever angle you want. If you want to install a camera on vinyl siding but don’t want to drill into it, i found a solution. Easy to remove and relocate 4.

Leave a Reply

Your email address will not be published.